1.Which of the following are true of unicast IP？

　　It can be either TCP or UDP

　　 It uses a class D address A server transmitting unicast

　　 IP does not need to ‘know’ the recipient‘s address

　　2.Which of the following are true of remote services？

　　

　　They are centralized and therefore

　　 require transport across the backbone to reach the user

　　 They are common to all users They are on a different VLAN

　　 than the user They are typically connected

　　 to the user via a layer 2 switching path

　　3.Which of the following is a form of out-of-band management？

　　

　　Web-based management Console port LAT TELNET

　　

　　4.Spanning tree protocols puts a port in one of 5 states.

　　 Which of the following is true of the forwarding state？

　　No frames are forwarded. BPDU‘s are heard.

　　 No frames are forwarded. No BPDU’s are heard.

　　 No frames are forwarded. Learning Addresses.

　　 Frames are forwarded. Learning addresses.

　　5.What security measures does Cisco suggest

　　 in the access layer of their recommended campus architecture？

　　Route filtering Cisco recommends no security measures

　　 in the access layer Device security such as passwords

　　 Port security

　　6.Telnet access directly to a switch or router command

　　 uses what facility？

　　 slip server async port line

　　7.What mechanism can be used to prevent ‘rogue’

　　 HSRP routers from asserting high priorities and

　　 becoming the active router？

　　

　　MD5 authentication may be used in HSRP messages

　　 Plain text authentication may be used in HSRP messages

　　 The command ‘standby （group_number）access-group （access_list）’

　　 is used to specify the routers that may participate

　　 in an HSRP group Each HSRP router is explicitly

　　 configured with the address of the other routers

　　 in the group using

　　 the command ‘standby （group_number） （group_member_address）

　　8.What command will set duplex mode

　　 on a set based switch to half？

　　

　　9.Which of the following are true of a LAN

　　 segmented with layer 2 switches？

　　

　　Path determination is based on OSI reference model

　　 Layer2 information Path determination is based

　　 on OSI reference model Layer3 information

　　Path determination is based on OSI reference model

　　 Layer4 information It supports multiple high-speed

　　 data exchanges

　　10.What will a Catalyst switch do with

　　 a multicast （in default configuration）？

　　

　　Learn the correct destinations Flood the multicast

　　 frames out each port within the VLAN on

　　 which it is received Query the IGMP designated

　　 router Query the domain to determine multicast

　　 group membership